China best Farm Implements Beehive Lifter Zl16f Telescopic Wheel Loader with Good quality

Product Description

Farm Implements Beehive Lifter Zl16f Telescopic Wheel Loader

Good Features of STEEL CZPT M915 loader:

Multipurpose, both front ant rear end can hook some attachments

Hydrostatic 4 wheel drive, stepless speed change.

0~12~24km/h, 2 speed, efficient and powerful.

Telescopic boom with self levering, boom floating

Joystick control 

Hydraulic quick hitch for various attachments

Flexible articulation, fantastic manuverability in rough terrain.

Up to 82L/min big output to attachments, powerful and efficient.

Loader technical data:

Model M915 multifunction wheel loader
Dimension with cabin (LxWxH) 3400X1500X2300mm
Max. lifting height (boom retract)  3000mm
Max. lifting height (boom extend)  3562mm
Pulling force  18kN
Bucket capacity 0.8cbm
Max. loading capacity 1500kg
Min. turning radius 2800mm
Turning angle 450
Min. ground clearance  330mm
Speed 0-12~24 km/h
Weight with bucket and counterweight 2300 kg
Standard tire 31X15.5-15
Tire pressure 2.8 bar
Oil tank capacity 80L
Pressure 200bar
Working oil flow 41L/minx2
Tracking oil flow 120L/min
Oil model(mineral oil) L-HL46
Fuel tank capacity 42L
Battery 60Ah, 12V
Engine Perkins 404D-22, 50hp, 4 cylinder, diesel 
Standard configuration: Closed cabin with heating and fan, hydraulic quick coupling, telescopic boom, boom floating, self levering, flexible articulation, standard bucket
Options 
Open ROPS canopy 3 point hitch with hydraulic pto
Normal boom without telescopic  8/16km/h 2 speed wheel motor
Rear hydraulic output with separate control Trailer hook
3 point hitch  Bobcat coupling plate
Air conditioner Multi-way couipler

Advantages of M915 multifunction wheel loader:

Items STEEL CZPT loader Other loader
Driving system Full hydostatic 4WD
One piston pump+4 hydraulic motors combine its driving system
Hydraulic/Mechanical driving
Axle+torque converter+transmission shaft axle+gearbox motor
Working system Twin pump for working devices
Can choose the flow to be 1 pump’s or twin pumps’
Single pump, no option
Independent system Yes.
The driving system and working system are independent closed system, can give max. output even when the loader is steady
No.
The driving system and working system share some circuit, the output is relative with the driving speed
Boom Telescopic No-telescopic
Boom floating Standard Option for extra charge
Hydraulic quick coupling Standard Depends
Electric output on boom Standard Not available
Components Perkins/Cummins engine, Italy pump and valves, UK seals At most have an oversea engine, the rest are all local parts
Rear hydraulic output Standard Not available 
3 point hitch Available as option Not available
Tiltable cabin Standard Not availabl

Loader+Tractor, 1 Multi-purpose helper for all your works

Front part is loader, with telescopic boom, hydraulic output, quick hitch and coupling system for various attachments, like bucket, fork, grapple, auger, hammer, lawn mower, etc.

Rear part is tractor, with hydraulic output, 3-point hitch, hydraulic PTO, for rotary tiller, flail mower, plough, harrow, trailer, etc.

STEEL CZPT series machines are widely used in farming, agriculture, landscaping, gardening, construction, municiple, etc.

Our service:

 

Certification: TUV, ISO, RoHS, CE, Rops Fops
Condition: New
Rated Load: 1-3t
Transmission: Hydrostatic
Load and Unload Mode: Front Discharge
Walking Mode: Wheeled
Customization:
Available

|

Customized Request

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China best Farm Implements Beehive Lifter Zl16f Telescopic Wheel Loader   with Good quality China best Farm Implements Beehive Lifter Zl16f Telescopic Wheel Loader   with Good quality
editor by CX 2023-04-18

Tags:

power take off shaft

As one of leading power take off shaft manufacturers, suppliers and exporters of mechanical products, We offer power take off shaft and many other products.

Please contact us for details.

Mail:sales@powertakeoffshaft.top

Manufacturer supplier exporter of power take off shaft

Recent Posts